Just like any programming language, platform, or library, getting up and running with Node.js takes some initial setup before you can start hacking away. With Node.js, the only initial setup required is, quite simply, getting the binary installed.

Stay on top of your project by transforming your nodes into tasks. Easily sync your shopping list, research deadlines, or weekend plans with the Apple Reminders app and tick off what's done. App Store and Mac App Store are service marks of Apple Inc.

• The latter seems to be node modules that came with Node, e.g., lodash, when the former is Node modules that I installed using npm. Share improve this answer follow edited Nov 28 '18 at 14:26.
• Node.js® is a JavaScript runtime built on Chrome's V8 JavaScript engine. Latest LTS Version: 12.18.4 (includes npm 6.14.6) Download the Node.js source code or a pre-built installer for your platform, and start developing today.

In this quick tutorial, we'll take a quick look at how to get Node.js on macOS. Once we've completed the entirety of the tutorial, you'll be ready to take the next step with Node.js.

This guide covers installing Node.js on the following versions of OS X and macOS: OS X 10.10 (Yosemite), OS X 10.11 (El Capitan), and macOS 10.11. These are the versions that are consistently tested and supported by the Node.js build process at the time of writing.

Step 0: The Quick Guide (TL;DR) to Get Node.js Installed on macOS

Here's the abbreviated guide, highlighting the major steps:

1. Go to the Node.js Downloads page
2. Download Node.js for macOS by clicking the 'Macintosh Installer' option
3. Run the downloaded Node.js .pkg Installer
4. Run the installer, including accepting the license, selecting the destination, and authenticating for the install.
5. You're finished! To ensure Node.js has been installed, run node -v in your terminal - you should get something like v6.9.4

Step 1: Download the Node.js .pkg Installer

As our first step, we need to actually get the official installer for Node.js on macOS. To do so, we can head over to the Node.js Downloads page to download the installer.

You can get the macOS installer by clicking the Macintosh Installer option - this will download the .pkg installer for Node.js. Make sure you save it somewhere that you'll be able to access it!

Step 2: Run the Node.js Installer

Now that you've got the installer downloaded, you'll need to run it. The installer is a pretty typical interface - it won't take long to get through it (under a minute), even though there are a few parts to it. You can get through it by following the guide below:

• Introduction
  • Select Continue
• License
  • Select Continue
  • Select Agree
• Installation Type
  • Select Install
  • Authenticate with your Mac to allow the Installation
  • Select Install Software
• Summary
  • Select Close

To verify that Node.js was installed correctly on your Mac, you can run the following command in your terminal:

If Node.js was properly installed, you'll see something close to (but probably not exactly) this:

As one last step for good measure, we'll update your version of npm.

Node.js always ships with a specific version of npm - Node.js doesn't (and shouldn't!) automatically update npm. The npm releases aren't synced with Node.js releases. Because of this, there's almost always a newer version of npm than the one that is installed by default with a given version of Node.

To easily update your version of npm, you can run the following command:

Step 6: Start building with Node.js!

Now you've got Node.js on your Mac. It's time to start exploring!

Thankfully, we've got your back. We've got a ton of articles on getting started with Node.js! If you're interested in exploring ES6, you should check out our article on some of the most exciting ES6 features in Node.js. Looking for ways to standardize your JavaScript code across your team? In that case, you should check out our guide to using ESLint to build code standards in Node.js applications. Maybe you'd just like to start deploying your applications? In that case, check out our guide on deploying Node.js apps with systemd!

That said, if you want to keep in touch with Node.js and the surrounding ecosystem, you should go follow @NodeSource on Twitter! We'll keep you updated with important news from the Node.js project, and share the best Node.js tutorials, guides, and tools that the community has to offer!

Visual Studio allows you to easily create a Node.js project and experience IntelliSense and other built-in features that support Node.js. In this tutorial for Visual Studio, you create a Node.js web application project from a Visual Studio template. Then, you create a simple app using React.

In this tutorial, you learn how to:

• Create a Node.js project
• Add npm packages
• Add React code to your app
• Transpile JSX
• Attach the debugger

Before you begin

Here's a quick FAQ to introduce you to some key concepts.

What is Node.js?

Node.js is a server-side JavaScript runtime environment that executes JavaScript server-side.

What is npm?

npm is the default package manager for the Node.js. The package manager makes it easier for programmers to publish and share source code of Node.js libraries and is designed to simplify installation, updating, and uninstallation of libraries.

What is React?

React is a front-end framework to create a UI.

What is JSX?

JSX is a JavaScript syntax extension, typically used with React to describe UI elements. JSX code must be transpiled to plain JavaScript before it can run in a browser.

What is webpack?

webpack bundles JavaScript files so they can run in a browser. It can also transform or package other resources and assets. It is often used to specify a compiler, such as Babel or TypeScript, to transpile JSX or TypeScript code to plain JavaScript.

Prerequisites

• You must have Visual Studio installed and the Node.js development workload.

  If you haven't already installed Visual Studio 2019, go to the Visual Studio downloads page to install it for free.

  If you haven't already installed Visual Studio 2017, go to the Visual Studio downloads page to install it for free.

  If you need to install the workload but already have Visual Studio, go to Tools > Get Tools and Features.., which opens the Visual Studio Installer. Choose the Node.js development workload, then choose Modify.

• You must have the Node.js runtime installed.

  This tutorial was tested with version 12.6.2.

  If you don't have it installed, we recommend you install the LTS version from the Node.js website for best compatibility with outside frameworks and libraries. Node.js is built for 32-bit and 64-bit architectures. The Node.js tools in Visual Studio, included in the Node.js workload, support both versions. Only one is required and the Node.js installer only supports one being installed at a time.

  In general, Visual Studio automatically detects the installed Node.js runtime. If it does not detect an installed runtime, you can configure your project to reference the installed runtime in the properties page (after you create a project, right-click the project node, choose Properties, and set the Node.exe path). You can use a global installation of Node.js or you can specify the path to a local interpreter in each of your Node.js projects.

Create a project

First, create a Node.js web application project.

1. Open Visual Studio.

2. Create a new project.

   Press Esc to close the start window. Type Ctrl + Q to open the search box, type Node.js, then choose Blank Node.js Web Application - JavaScript. (Although this tutorial uses the TypeScript compiler, the steps require that you start with the JavaScript template.)

   In the dialog box that appears, choose Create.

   From the top menu bar, choose File > New > Project. In the left pane of the New Project dialog box, expand JavaScript, then choose Node.js. In the middle pane, choose Blank Node.js Web Application, type the name NodejsWebAppBlank, then choose OK.

   If you don't see the Blank Node.js Web Application project template, you must add the Node.js development workload. For detailed instructions, see the Prerequisites.

   Visual Studio creates the new solution and opens your project.

   (1) Highlighted in bold is your project, using the name you gave in the New Project dialog box. In the file system, this project is represented by a .njsproj file in your project folder. You can set properties and environment variables associated with the project by right-clicking the project and choosing Properties. You can do round-tripping with other development tools, because the project file does not make custom changes to the Node.js project source.

   (2) At the top level is a solution, which by default has the same name as your project. A solution, represented by a .sln file on disk, is a container for one or more related projects.

   (3) The npm node shows any installed npm packages. You can right-click the npm node to search for and install npm packages using a dialog box or install and update packages using the settings in package.json and right-click options in the npm node.

   (4) package.json is a file used by npm to manage package dependencies and package versions for locally-installed packages. For more information, see Manage npm packages.

   (5) Project files such as server.js show up under the project node. server.js is the project startup file and that is why it shows up in bold. You can set the startup file by right-clicking a file in the project and selecting Set as Node.js startup file.

Add npm packages

This app requires a number of npm modules to run correctly.

• react
• react-dom
• express
• path
• ts-loader
• typescript
• webpack
• webpack-cli

1. In Solution Explorer (right pane), right-click the npm node in the project and choose Install New npm Packages.

   In the Install New npm Packages dialog box, you can choose to install the most current package version or specify a version. If you choose to install the current version of these packages, but run into unexpected errors later, you may want to install the exact package versions described later in these steps.

2. In the Install New npm Packages dialog box, search for the react package, and select Install Package to install it.

   Select the Output window to see progress on installing the package (select Npm in the Show output from field). When installed, the package appears under the npm node.

   The project's package.json file is updated with the new package information including the package version.

3. Instead of using the UI to search for and add the rest of the packages one at a time, paste the following code into package.json. To do this, add a dependencies section with this code:

   If there is already a dependencies section in your version of the blank template, just replace it with the preceding JSON code. For more information on use of this file, see package.json configuration.

4. Save the changes.

5. Right-click npm node in your project and choose Install npm Packages.

   This command runs the npm install command directly.

   In the lower pane, select the Output window to see progress on installing the packages. Installation may take a few minutes and you may not see results immediately. To see the output, make sure that you select Npm in the Show output from field in the Output window.

   Here are the npm modules as they appear in Solution Explorer after they are installed.

   Note

   If you prefer to install npm packages using the command line, right-click the project node and choose Open Command Prompt Here. Use standard Node.js commands to install packages.

Add project files

In these steps, you add four new files to your project.

• app.tsx
• webpack-config.js
• index.html
• tsconfig.json

For this simple app, you add the new project files in the project root. (In most apps, you typically add the files to subfolders and adjust relative path references accordingly.)

1. In Solution Explorer, right-click the project NodejsWebAppBlank and choose Add > New Item.

2. In the Add New Item dialog box, choose TypeScript JSX file, type the name app.tsx, and select Add or OK.

3. Repeat these steps to add webpack-config.js. Instead of a TypeScript JSX file, choose JavaScript file.

4. Repeat the same steps to add index.html to the project. Instead of a JavaScript file, choose HTML file.

5. Repeat the same steps to add tsconfig.json to the project. Instead of a JavaScript file, choose TypeScript JSON Configuration file.

Add app code

1. Open server.js and replace the existing code with the following code:

   The preceding code uses Express to start Node.js as your web application server. This code sets the port to the port number configured in the project properties (by default, the port is configured to 1337 in the properties). To open the project properties, right-click the project in Solution Explorer and choose Properties.

2. Open app.tsx and add the following code:

   The preceding code uses JSX syntax and React to display a simple message.

3. Open index.html and replace the body section with the following code:

   This HTML page loads app-bundle.js, which contains the JSX and React code transpiled to plain JavaScript. Currently, app-bundle.js is an empty file. In the next section, you configure options to transpile the code.

Configure webpack and TypeScript compiler options

In the previous steps, you added webpack-config.js to the project. Next, you add webpack configuration code. You will add a simple webpack configuration that specifies an input file (app.tsx) and an output file (app-bundle.js) for bundling and transpiling JSX to plain JavaScript. For transpiling, you also configure some TypeScript compiler options. This code is a basic configuration that is intended as an introduction to webpack and the TypeScript compiler.

1. In Solution Explorer, open webpack-config.js and add the following code.

   The webpack configuration code instructs webpack to use the TypeScript loader to transpile the JSX.

2. Open tsconfig.json and replace the default code with the following code, which specifies the TypeScript compiler options:

   app.tsx is specified as the source file.

Transpile the JSX

1. In Solution Explorer, right-click the project node and choose Open Command Prompt Here.

2. In the command prompt, type the following command:

   node_modules.binwebpack app.tsx --config webpack-config.js

   The command prompt window shows the result.

   If you see any errors instead of the preceding output, you must resolve them before your app will work. If your npm package versions are different than the versions shown in this tutorial, that can be a source of errors. One way to fix errors is to use the exact versions shown in the earlier steps. Also, if one or more of these package versions has been deprecated and results in an error, you may need to install a more recent version to fix errors. For information on using package.json to control npm package versions, see package.json configuration.

3. In Solution Explorer, right-click the project node and choose Add > Existing Folder, then choose the dist folder and choose Select Folder.

   Visual Studio adds the dist folder to the project, which contains app-bundle.js and app-bundle.js.map.

4. Open app-bundle.js to see the transpiled JavaScript code.

5. If prompted to reload externally modified files, select Yes to All.

Each time you make changes to app.tsx, you must rerun the webpack command. To automate this step, add a build script to transpile the JSX.

Add a build script to transpile the JSX

Starting in Visual Studio 2019, a build script is required. Instead of transpiling JSX at the command line (as shown in the preceding section), you can transpile JSX when building from Visual Studio.

• Open package.json and add the following section after the dependencies section:

Run the app

1. Select either Web Server (Google Chrome) or Web Server (Microsoft Edge) as the current debug target.

   If Chrome is available on your machine, but does not show up as an option, choose Browse With from the debug target dropdown list, and select Chrome as the default browser target (choose Set as Default).

2. To run the app, press F5 (Debug > Start Debugging) or the green arrow button.

   A Node.js console window opens that shows the port on which the debugger is listening.

   Visual Studio starts the app by launching the startup file, server.js.

3. Close the browser window.

4. Close the console window.

Set a breakpoint and run the app

1. In server.js, click in the gutter to the left of the staticPath declaration to set a breakpoint:

   Breakpoints are the most basic and essential feature of reliable debugging. A breakpoint indicates where Visual Studio should suspend your running code so you can take a look at the values of variables, or the behavior of memory, or whether or not a branch of code is getting run.

2. To run the app, press F5 (Debug > Start Debugging).

   The debugger pauses at the breakpoint you set (the current statement is marked in yellow). Now, you can inspect your app state by hovering over variables that are currently in scope, using debugger windows like the Locals and Watch windows.

3. Press F5 to continue the app.

4. If you want to use the Chrome Developer Tools or F12 Tools for Microsoft Edge, press F12. You can use these tools to examine the DOM and interact with the app using the JavaScript Console.

5. Close the web browser and the console.

Set and hit a breakpoint in the client-side React code

In the preceding section, you attached the debugger to server-side Node.js code. To attach the debugger from Visual Studio and hit breakpoints in client-side React code, the debugger needs help to identify the correct process. Here is one way to enable this.

Prepare the browser for debugging

For this scenario, use either Microsoft Edge (Chromium), currently named Microsoft Edge Beta in the IDE, or Chrome.

1. Close all windows for the target browser.

   Other browser instances can prevent the browser from opening with debugging enabled. (Browser extensions may be running and preventing full debug mode, so you may need to open Task Manager to find unexpected instances of Chrome.)

   For Microsoft Edge (Chromium), also shut down all instances of Chrome. Because both browsers share the chromium code base, this gives the best results.

2. Start your browser with debugging enabled.

   Starting in Visual Studio 2019, you can set the --remote-debugging-port=9222 flag at browser launch by selecting Browse With.. > from the Debug toolbar, then choosing Add, and then setting the flag in the Arguments field. Use a different friendly name for the browser such as Edge with Debugging or Chrome with Debugging. For details, see the Release Notes.

   Alternatively, open the Run command from the Windows Start button (right-click and choose Run), and enter the following command:

   msedge --remote-debugging-port=9222

   or,

   chrome.exe --remote-debugging-port=9222

   Open the Run command from the Windows Start button (right-click and choose Run), and enter the following command:

   chrome.exe --remote-debugging-port=9222

   This starts your browser with debugging enabled.

   The app is not yet running, so you get an empty browser page.

Attach the debugger to client-side script

1. Switch to Visual Studio and then set a breakpoint in your source code, either app-bundle.js or app.tsx.

   For app-bundle.js, set the breakpoint in the render() function as shown in the following illustration:

   To find the render() function in the transpiled app-bundle.js file, use Ctrl+F (Edit > Find and Replace > Quick Find).

   For app.tsx, set the breakpoint inside the render() function, on the return statement.

2. If you are setting the breakpoint in the .tsx file (rather than app-bundle.js), you need to update webpack-config.js. Replace the following code:

   with this code:

   This is a development-only setting to enable debugging in Visual Studio. This setting allows you to override the generated references in the source map file, app-bundle.js.map, when building the app. By default, webpack references in the source map file include the webpack:/// prefix, which prevents Visual Studio from finding the source file, app.tsx. Specifically, when you make this change, the reference to the source file, app.tsx, gets changed from webpack:///./app.tsx to ./app.tsx, which enables debugging.

3. Select your target browser as the debug target in Visual Studio, then press Ctrl+F5 (Debug > Start Without Debugging) to run the app in the browser.

   If you created a browser configuration with a friendly name, choose that as your debug target.

   The app opens in a new browser tab.

4. Choose Debug > Attach to Process.

   Tip

   Starting in Visual Studio 2017, once you attach to the process the first time by following these steps, you can quickly reattach to the same process by choosing Debug > Reattach to Process.

5. In the Attach to Process dialog box, get a filtered list of browser instances that you can attach to.

   In Visual Studio 2019, choose the correct debugger for your target browser, JavaScript (Chrome) or JavaScript (Microsoft Edge - Chromium) in the Attach to field, type chrome or edge in the filter box to filter the search results.

   In Visual Studio 2017, choose Webkit code in the Attach to field, type chrome in the filter box to filter the search results.

6. Select the browser process with the correct host port (localhost in this example), and select Attach.

   The port (1337) may also appear in the Title field to help you select the correct browser instance.

   The following example shows how this looks for the Microsoft Edge (Chromium) browser.

   You know the debugger has attached correctly when the DOM Explorer and the JavaScript Console open in Visual Studio. These debugging tools are similar to Chrome Developer Tools and F12 Tools for Microsoft Edge.

   Tip

   If the debugger does not attach and you see the message 'Unable to attach to the process. An operation is not legal in the current state.', use the Task Manager to close all instances of the target browser before starting the browser in debugging mode. Browser extensions may be running and preventing full debug mode.

7. Because the code with the breakpoint already executed, refresh your browser page to hit the breakpoint.

   While paused in the debugger, you can examine your app state by hovering over variables and using debugger windows. You can advance the debugger by stepping through code (F5, F10, and F11). For more information on basic debugging features, see First look at the debugger.

   We use Google Play Licensing, which is a network-based service. Is it possible to download my license and store it localy?' Then I need to connect my device to other network with Internet and let Google Play service to check it. Ud83eudd13SSHud83eudd13 u269cSilver.Surfer.Hacksu269c',927000000,1,null,null,'9','Jermiah Walker',null,null,2,null,null,null,'Vet Magen',null,2,null,null,null,'use Remotix in my company for connection to Terminal Server. Remotix agent for mac. My WIFI network has no Internet Access and sometime I get License Check error.

   You may hit the breakpoint in either app-bundle.js or its mapped location in app.tsx, depending on which steps you followed previously, along with your environment and browser state. Either way, you can step through code and examine variables.

   • If you need to break into code in app.tsx and are unable to do it, use Attach to Process as described in the previous steps to attach the debugger. Make sure you that your environment is set up correctly:

     • You closed all browser instances, including Chrome extensions (using the Task Manager), so that you can run the browser in debug mode. Make sure you start the browser in debug mode.

     • Make sure that your source map file includes a reference to ./app.tsx and not webpack:///./app.tsx, which prevents the Visual Studio debugger from locating app.tsx.Alternatively, if you need to break into code in app.tsx and are unable to do it, try using the debugger; statement in app.tsx, or set breakpoints in the Chrome Developer Tools (or F12 Tools for Microsoft Edge) instead.

   • If you need to break into code in app-bundle.js and are unable to do it, remove the source map file, app-bundle.js.map.

What Is Logic Node For Mac

Next steps